Made from silicone rubber, EECO Elastomer keypads are available either conductive or non-conductive, single or
multi-coloured, and to almost any shape to suit customers' individual design requirements. They may interface directly with a Printed Circuit Board or with a Membrane switch
layer. Applications are widespread and varied.

There are two basic types of keypad:

INTEGRAL

A one-piece construction incorporating keys and
keymat, available in a wide variety of colours and key shapes, with or without legends. Designed to be
fitted directly into a bezel, typically in handheld equipment.

INNER

A keymat designed to act as a switching layer
between the manual keys and membrane circuit/PCB, typically in a full-travel PC keyboard.

All EECO elastomer keypads are compression-moulded, utilising either single cavity prototype tooling for low
volume or multi-cavity production tooling for medium
and high volume to give the customer the most
economical financial solution.

Elastomer keypads offer the design engineer the kind of versatility and user-friendliness that can meet any and
all of his design requirements.

EECO integral type Elastomer keypads may be supplied 'with or without legends', with solid colours or in natural translucent colour. The latter are specified where backlighting is used, in which case the keys may be field-lighted (printed legend on translucent field) or reverse field-lighted (printed field with lighting through etched-out legend).

Contact Us Now

Tel: (+44) (0) 1954 781818

sales@eecoswitch.co.uk